Hallway Bath Renovation: Questions Answered

Thanks all for the nice comments on our hallway bath reveal. I thought I’d go into a little more detail and answer a few questions I’ve received.

Gray Budget Bathroom Remodel  - a closer look and questions answered!

 

Silestone Corner Shelves in Shower

A few of you asked how the Silestone Lagoon corner shelves are installed in the shower. They are installed while tiling. The shelf is set on a row of tile, then cut the next row to fit around them. The thinset on the wall and the grout locks them in.

How to install Silestone Lagoon corner shelves

We put the shelves in that location because I didn’t want the first thing you see when you walk into the bathroom to be our shampoo bottles. While the shelves are one of my favorite features of the bathroom, the doorway to the shower is right at the top of the stairs and you can see into the shower and the other corner, so I wanted to keep that corner looking clean and tidy.

 

The Hand Shower

I’ve also received some questions about how we like using a hand shower on a sliding bar as our main shower head. I looove it.

For budget concious and small showers, skip dual shower heads and use only a hand shower!

I’ve seen tons of pictures of bathrooms with the regular shower head and then a hand shower on a bar off to the side, which seems to be the thing to do these days, but it’s more expensive to have the plumbing done for this configuration, and I’m guessing that second hand shower gets mostly ignored if it’s off to the side like that. A hand shower was important to us because I like it for cleaning, and I just think they are super functional. Also, our alcove tub isn’t as deep as, say, a luxurious master shower you see in BH&G, so to fit in a hand shower would have been tight, especially with the corner shelves up by the plumbing.

For a tight space or budget conscious I’d highly recommend going with just a hand shower on a bar.  I particularly like having the style on a bar, as opposed to the kind you can just screw into your regular shower head arm, because I’m 5’1, so it’s much more comfortable to have the shower head at my height. You taller folk might be wondering why :). Down where I am, I end up getting the widest part of the spray, so if I’m rinsing out my hair, half the water is going around my head. It’s nice to have the more concentrated part of the spray closer by lowering it down. Not that big of a deal, and I could certainly live with it if we had a different setup, but it was an easy enough fix while we were renovating the bathroom. Marty still uses our other shower mostly (it’s kinda nice that we each have our “own” showers!) but when he does use this one he can easily raise it up. I also think for a hand shower, the kind on a bar look nicer than the kind you screw into the regular shower head arm. The kind you can use with the arm are great if you are working with an existing shower, but since we were renovating, we figured we’d design it for the way we planned to use it.

 

Cleaning Beveled Subway Tile

I’ve also had some questions about cleaning the beveled subway tile in the shower and if the bevels attract extra soap scum and grime. It doesn’t seem to…but I’ve also been actively preventing that, which I’ll get to in a sec. Our beveled tile isn’t as deep of a bevel as some. I would definitely recommend a shallower bevel for a shower and save the deeper bevels for backsplashes and other decorative areas. I could see a deeper bevel being an issue.

Shallow beveled subway tile for shower. The bevel adds interest but is still easy to clean.

I have actually gotten in the habit of wiping down the shower with a towel after getting out, and I’m experimenting with this to see if this will keep us from needing to clean and scrub it as often. So far so good. It’s been over a month that we have had the shower, and not a single bit of mold, mildew, or soap scum, and I haven’t cleaned it except for wiping it out daily. I have a special towel that I wash regularly that hangs on its own hook for this purpose, and we had a bathroom fan installed which I make sure to run. This might seem kind of gross at first, since we’re all so in the habit of spraying bleach, chemicals, or even vinegar to disinfect, but what makes showers a germ-fest is  the standing water, day after day, which allows bacteria, mold, and mildew to grow. We started from day 1, so a clean slate, literally.  I’m still going to disinfect it sometimes, just because I’ll probably start to imagine these things are crawling around and I just can tell, but drying it out seems to be keeping the shower clean and sparkly. I’ll keep up with this experiment and let you guys know how it goes!

Dry out shower each time to prevent mold, mildew, and soap scum buildup. Never scrub again!

I also realized I didn’t show a good picture of our mirror and vanity together, and I LOVE how this area turned out.

Mirror from Lowe's with Home Depot Vanity and Silestone Lagoon top

If you haven’t already, check out my hallway bath “done” post for all of the sources and to see the rest of the bathroom!

 

Linking up to: Linking up to: Funky Junk InteriorsSavvy Southern StyleRemodelaholic,The DIY Show OffMy Uncommon Slice of SuburbiaHome Stories A2ZHouse of HepworthsLife in GraceHouse of Rose

 

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

No Sew Roman Shade FAQs

My previous post on my no sew roman shade from a mini blind has by far been my most popular post to date. I added a Pin counter not to long ago, and to my shock, it has over 108,000 Pinterest pins, and counting! Crazy for this little blog of mine. Moments like that make me feel really good, and if I’m having a tough blogging day, I can go check out that counter to pick me back up, so thanks guys :)

So anyway, I’ve gotten a ton of great reader questions about the roman shade and thought I’d post some of the more frequently asked ones.

No Sew Roman Shade from Mini Blinds

Is it possible to add a liner?

A number of readers have reported back that they have added a liner. Some have said they have doubled up the fabric for blackout purposes, and others have used a separate white (or other fabric) to cover up the slats. If anyone has done this and has a tutorial, please send me a link!

 

Would this work with wood blinds?

I haven’t personally tried it, but I think it would.

 

How much fabric do I need?

This will vary depending on your window. You need a piece of fabric that is a couple inches larger on each side than your blind.

 

What type of glue did you use?

I used Liquid Stitch Fabric Glue.  Make sure to use some kind of fabric glue since it is designed to not show through the fabric or yellow.

Fabric Glue for No Sew Roman Shade from Mini Blind

Can you see the slats when it is down?

When the sun shines through, yes, I can see the shadow of the slats. Check out the comments in my original post for lots of ideas from readers on how to avoid this.

 

How do you clean it?

I just vacuum it. I would not recommend trying to wash it. An indoor/outdoor fabric might be a better choice if you are concerned about cleaning since it could be more easily wiped down. Some readers have suggested using velcro on the back of the fabric instead of glue so that you can remove the fabric for washing. While I haven’t tried this, I think that also might be a good option.

 

How do you mount it?

The blinds I purchased for this project mounted from behind. In the picture below you can see one of the clips holding the blind. If you are buying new blinds, I would recommend purchasing this style. I don’t have experience using the style with the cube type mounting bracket that wraps around either end of the top metal bar, but if this is what you are working with you could try not gluing just the top corners of the fabric down, so they lay on top and hide the cube mounting bracket when you hang the blind. If it flips out at the corners when you do this, velcro might work to hold it down. I haven’t tried this, so if you do, please report back in the comments!

How to mount no sew roman shade from mini blind

Could you sew it instead of gluing?

Sure! If you are more comfortable sewing the edges, then by all means do so. I would still recommend fabric glue for attaching the fabric to the slats.

 

Where are the cords?

The cords to raise and lower the shade just run down the side of the window when the shade is up, and when it is down, the cords are behind the shade. To get t to them, I just reach behind the shade. This might vary depending on your blinds.

 

Will the fabric glue hold the weight of the blinds?

I’ve gotten this question a lot. The fabric glue doesn’t hold anything but the weight of the fabricThe blinds are held by the ladder cord which is part of the raising/lowering mechanism of the blind. When you raise and lower the shade, the blinds go up and down on the ladder cord, and the fabric is just along for the ride.  Because of this, I don’t have any worries about the durability. Even if the fabric comes off one day, I would just glue it back :). So far so good, though.

 

If you have any other questions, post them here in the comments or in my original how to make a roman shade from a mini blind post, and I’ll try to answer them!

Linking up to: Funky Junk InteriorsSavvy Southern StyleRemodelaholic,The DIY Show OffMy Uncommon Slice of SuburbiaHome Stories A2ZHouse of HepworthsHouse of Rose, Jennifer Rizzo

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Office Progress

Our 3 bedroom, 1600 sq foot home unfortunately doesn’t have a designated office space, but we have recently (and finally) begun to turn our second bedroom into one. I telecommute sometimes, and sitting at the kitchen table got uncomfortable after awhile. We also only have one living area (no basement or separate den) and sometimes it’s nice to have your own space and watch whatever you want on TV. So this room is really an office/den/extra bedroom. It is a work in progress when we have time in between renovating bathrooms and kitchens  and is definitely a lot of using what we have in terms of furniture going on.

Sherwin Williams Useful Gray Office

First (and most necessary) step was painting it Sherwin Williams Useful Gray.

Office Before

This room was one of the more…jarring…rooms in the house when we bought it (and that’s saying something, since we had some interesting paint colors initially). I’m assuming it was a kids room.

I think that’s why I went the complete opposite route using soft and soothing color. Sherwin Williams Useful gray fit the bill perfectly. You can also see the bathroom peeking out through the doorway :). I always enjoy seeing how rooms flow in other blogger’s homes, so I’m going to try to do that more.

Sherwin Williams Useful Gray

The Sheepskin rug is from Amazon. I absolutely love it. It is so soft and easy to clean. It doesn’t shed like a lot of wool rugs since it’s real sheepskin, and it is naturally non-slip since it is basically suede on the back. This is considered a 4 pelt.  All sheepskin rugs are unique with some bigger, some smaller, some whiter, some a little more yellow, but you are limited to certain shapes, since there are only so many ways they can sew together the pelts. It’s a bit of a gamble ordering online since you can’t choose your specific rug, but I’m very pleased with the one we got.

4 Pelt Sheepskin Rug

See that storage cube under the desk? We use it as a foot rest. I can’t tell you how much more comfy it is to put your feet up under your desk. Try it. You’ll love it.

A part of me always wants to make a room perfect before posting, but I figure we all have rooms in our homes where we feel we could make some improvements, and this is definitely one of them for me. Like I said this is mostly stuff we already had, and I won’t list out all the things I’d like to change and add since I’m just so glad to finally have a calming, comfortable office space. Even as is, both Marty and I have been getting a lot of use out of this room – me during the day when I work from home sometimes, and at night it is Marty’s man cave.

So how about you? Any work in progress rooms that you love anyway?

 

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Hallway Bath “Done”

Why “done” and not just…done? I haven’t figured out what to hang over the toilet! It’s what the room is missing, so I don’t want to declare complete doneness until that’s done.

I last left off with a little sneak peek  of our new tub, tile surround, and tile floor and also how we solved a little looks vs. durability dilemma. We have since painted the walls, re-installed and painted the baseboards, installed the vanity and sink, hung a new mirror, split out the single light fixture into two sconces (with the help of my dad), and added additional towel hooks. We did all this while painting the laundry room and patio doors, so we’ve been busy around here!

Gray Hallway Bathroom Remodel

And just as a reminder, here’s where we started.

Hallway Bath Before

I am so smitten over the color we chose. It is Sherwin Williams Mega Greige. The mirror is by Allen+Roth from Lowe’s and the sconces are by Martha Stewart from Home Depot (and a total steal!).

Sherwin Williams Mega Greige Bathroom

Every time I find a new color I really like, I get the urge to paint my whole house that color. But, I’m sure that will pass. I really do like it a lot though.

The vanity is so so so functional. Vanities in general often seem less than efficient with storage to me, but this one by St. Paul has the perfect sized drawers and the perfect combo of drawers and cabinet. I wish all vanities came with a pullout bottom drawer. It is exactly the right height for extra TP, and there is still room to spare for more storage of stuff. The side drawers are deep enough to still be functional, and the cabinet part is just the right size for all of our taller bottles. And it was only $289!

St Paul Manchester Vanity with Silestone Lagoon

The counters are Silestone Lagoon and the sink is a Kohler Archer. Check out my durable bathroom materials post for all the deets on why we chose Silestone.

Silestone Lagoon with Kohler Archer Sink

The floors are Florim Stratos Avorio, a porcelain 12×24 tile.

Florim Stratos Avorio 12x24 Porcelain Tile

The beveled white subway tiles are are classic and functional. I’ve started wiping down the shower each time I get out to keep our grout fresh and new, and it really keeps the shower so much cleaner overall.

Beveled White Subway Tile Shower

The hand shower is amazing. It’s set low right now to accommodate my 5’1 height. Marty raises it up when he gets in. It really is so much more comfortable to have showerhead at your own custom height.

 

And these Silestone corner shelves make me so happy to be done with our old grungy shower caddy.

Silestone Lagoon Corner Shelves in Shower

I also hung a couple hooks right outside the shower for extra towels.

Large Towel Hooks

We went with larger hooks made by Martha Stewart from Home Depot because I find that they help with drying out the towels better. I think these are technically called robe hooks if you are searching for something similar.

Martha Stewart Robe Hook

Sources:

  • Wall Paint: Sherwin Williams Mega Greige
  • Trim Paint: Benjamin Moore Simply White (leftover from painting our kitchen crown molding)
  • Vanity: St. Paul Manchester from Home Depot
  • Vanity Top: Silestone Lagoon
  • Vanity Faucet: Moen
  • Vanity Sink: Kohler Archer
  • Mirror: Allen+Roth from Lowe’s
  • Sconces: Martha Stewart from Home Depot
  • Tub: Kohler Archer
  • Hand Shower: Moen
  • Tub Faucet and Handle: Moen
  • Toilet: Old American Standard
  • Shower corner shelves: Silestone Lagoon (same as vanity)
  • Floor Tile: Florim Stratos Avorio
  • Towel Hooks: Martha Stewart from Home Depot

Linking up to: Linking up to: Funky Junk InteriorsSavvy Southern StyleRemodelaholic,The DIY Show OffMy Uncommon Slice of SuburbiaHome Stories A2Z, House of Hepworths, Life in Grace, House of Rose

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Bathroom Materials: Durability vs. Looks…or can you have both?

In the hunt for bathroom materials, I was constantly swooning over images of beautiful bathrooms with things like marble showers and limestone floors. I love these materials…in someone else’s bathroom. They are so pretty and calming and have just the right blend of grays and creams and tans to somehow seem warm and cool at the same time.

Charlie and Co. Design

Unfortunately, if they were in one of our bathrooms I just know I would fret and worry over etching and scratching those “soft” stones while driving my husband crazy in the process. So instead I used those bathrooms as inspiration and set out on a mission to find nice looking, durable tile and counter materials.

But let me back up first. Before I came to that realization, I was at the Tile Shop one day and fell in love (like seriously) with a silver travertine they have called Legno Luce. It would have made a stunning floor tile. It came in  6×24 tiles (these were just 4×16 samples), so minimal grout, and it had subtle veining with tan and gray. I was blinded by the pretty tile.

Tile Shop Legno Luce

I was so sure this was it, then I started reading up on people’s experiences with marble and travertine floors, and my confidence slowly faded away. I went back to the store to look at their porcelain floor tiles and came out empty handed.

I made an appointment with a large local tile store nearby (I’ll be honest, with little hope of finding anything I really liked) and met with the most awesome lady. I showed her my inspiration pictures, and I explained that I liked the stone in these pictures, but I don’t want stone. I just want the look and feel and colors of stone. She got me immediately. Then she mentioned how much she likes to browse around Houzz.

She had me at Houzz.

We were like kindred spirits I tell you. The first tile she showed me was the one. Of course that didn’t mean I was done. No. I had to bring home a bunch of samples and agonize over them for a couple of weeks. But in the end, that first tile was the one we went with.

They had a display of this in the store, and I had to bend down and take a close look to even tell it was porcelain. Yes, I’m the girl in the store petting the floor.

Please excuse my iphone picture quality.

Florim Stratos Avorio 12x24 Porcelain Tile

It was called Florim Stratos Avorio, and it has a lot of similarities to the silver travertine I initially wanted. For a porcelain tile, it has a lot of depth and is very realistic in person. Fast forward to now, and here are our Tile Shop Legno Luce silver travertine samples on top of the Florim Stratos Avorio porcelain that we used in the bathroom. I think the Stratos Avorio is a pretty good lookalike!

Porcelain tile that looks like silver travertine

I knew going in that we wanted white subway tile for the shower surround, so I mentioned that. She was all let me show you this beveled subway tile! Then I was all but…er…um…our budget…? It actually wasn’t much more than the cheapo white subway tile at Home Depot. Score. I do certainly enjoy showering in here now.

Beveled White Subway Tile in Shower

The corner shelves for the shower were another story.  Nice looking and durable and at least somewhat budget friendly were not as easy as I thought to find in corner shelves. The only options I was able to readily find were white ceramic shelves that were a bit too chunky looking for the look I was going for, and marble shelves, which I didn’t want to have to worry about. I’d seen granite shelves you can order online, but that wouldn’t go with our look either.

Then I had a light bulb moment! Our stone fabricator can probably make quartz corner shelves to match our counters. Quartz can withstand just about anything you can throw at in (within reason, of course). We wanted three shelves, and got some quotes and they came to about $135 for all three. Not the cheapest option, but not as bad as I thought it would be. Score again.

The counters were actually an easy choice. We knew early on we wanted quartz, with only a fleeting thought of maybe doing a light granite, but we kept coming back to a marble look alike quartz. I had seen a lot of pictures of Caesarstone Misty Carrara and was pretty sure that would be the one, but then I saw Silestone Lagoon in person which is a fairly new offering. Oh, it’s pretty. It’s a lot like Misty Carrara, but I’d say just a tad more realistic looking. Either are good choices for a marble looking quartz.

Silestone Lagoon Vanity Top with Moen Faucet and Kohler Undermount

Here they are side-by-side. I took this in the store with my phone of their big samples. Caesarstone Misty Carrara is on the left and is a little bit creamier with less marbling. Silestone Lagoon is on the right and is a little bit lighter and grayer with more “veining”.

Silestone Lagoon and Caesarstone Misty Carrara Comparison

I had to call around to a bunch of fabricators to find a Silestone Lagoon remnant, and actually the only two fabricators that had it were the ones that do the stone counter fabrication for our local Home Depot and Lowe’s. If you are looking for lots of quartz remnants at a good price, maybe try and find out who your local big box stores use to fabricate. They will probably have a good selection.

So I guess the point of all my rambling here is that I think manufacturers have come a long way with their fakes, and it’s totally possible to do a nice looking bathroom with materials that will hopefully stand up to some wear and tear, scrubbing, and occasional harsh cleaning.

We’re just finishing up the final touches in here, and should be back for the full reveal soon. I’ve been posting some other sneak peeks over on my Facebook page if you want to check them out :).

Linking up to: Funky Junk Interiors, Savvy Southern Style, Remodelaholic, The DIY Show Off, My Uncommon Slice of Suburbia, Home Stories A2Z

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Ikea Kitchen Renovation – The Final Budget Rundown

I’m going to spoil the ending of this post. Our final cost for the kitchen was just below $8,500.

Total Kitchen Reno for $8,500 Using Ikea Cabinets

This was for a complete kitchen remodel that included everything but the floors. Previous owners had installed laminate which we decided to keep for the time being. We replaced everything else – cabinets, counters, appliances, backsplash, and added some custom trim. All was DIY’d!

Total Kitchen Reno for $8,500 Using Ikea Cabinets

Ikea Lidingo Cabinets – $2,700

Total Kitchen Reno for $8,500 using Ikea Cabinets

Kashmir White Granite Counters – $1,400

Kashmir White Granite Counters

Appliances (range, fridge, dishwasher, hood) – $3,000

Ikea Lidingo Kitchen

Tile Shop Hampton Carrara Marble Backsplash – $300

Restoration Hardware Cabinet Pulls/Knobs – $200

Restoration Hardware Gilmore Pulls and Duluth Knobs

Restoration Hardware Heath Flushmount – $200

Restoration Harware Heath Flushmount

Trim – ~$100 (I don’t remember exactly…might be overestimating)

Total Kitchen Renovation for $8,500 Using Ikea Cabinets

Kingston Brass Faucet – $200

Kingston Brass Faucet with Tile Shop Hampton Carrara Backsplash

Huuuge 32″ Kraus Sink – $300

Kraus 32" Single Bowl Sink

GE 0.7 cu ft Microwave that tucks away perfectly in the micro cabinet – $75

Microwave that fits Ikea microwave cabinet

 

Final Rundown:

  • Ikea Lidingo Cabinets – $2,700
  • Kashmir White Granite Counters – $1,400
  • Appliances (range, fridge, dishwasher, hood) – $3,000
  • Tile Shop Hampton Carrara Marble Backsplash – $300
  • Restoration Hardware Cabinet Pulls/Knobs – $200
  • Restoration Hardware Heath Flushmount – $200
  • Custom Trim – ~$100 (I don’t remember exactly…might be overestimating)
  • Kingston Brass Faucet – $200
  • 32″ Kraus Sink – $300
  • GE 0.7 cu ft Microwave – $75

Grand Total – $8,475

Also, I just want to let you guys know I’m now on Twitter and Instagram! Or rather, I’m trying to figure out Twitter and Instagram :). Come over and say hi!

Linking up to: Funky Junk Interiors, Savvy Southern Style, Remodelaholic, The DIY Show Off, My Uncommon Slice of Suburbia, Home Stories A2Z, Thrifty Decor Chick

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Hallway Bathroom – Sneak Peek

We had our tub and tile installed for our hallway bath the other day! So excited. It looks even better than I thought it would, which is always a good feeling.

Florim Stratos Avorio Tile with Kohler Archer Tub

This bathroom is getting a complete overhaul. Here’s where we started. Old fiberglass surround. Old peel and stick vinyl tile. A little bit of mold (yuck). Baseboards that were only half installed by previous owners. And a vanity that was falling apart.

We are over halfway completed in here thanks to hiring some of the work out. We hired a contractor to install the tub and tile, so now we are working on installing baseboards, painting, and putting in the new vanity.

The tile is Florim Stratos Avorio 12×24 porcelain tile.

Florim Stratos Avorio 12x24 Porcelain Tile

The corner shelves are Silestone Lagoon, which are the same as our soon to be installed vanity top.

Silestone Lagoon Quartz Shower Corner Shelves

The tub is a Kohler Archer and the fixtures are all Moen.

Kohler Archer Tub with Beveled White Subway Tile

Stay tuned for the rest!

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

My Favorite Bathroom Trends

I just can’t get enough of looking at bathrooms lately! We’re still getting quotes from contractors to help with some of the plumbing work (and possibly some tiling…we’ll see), so in the meantime I’ve been putting my time to good use and looking at lots of beautiful finished bathrooms.

This one is probably one of my favorites. I really like the medium gray walls, light tile, and natural brown accents. While we most likely won’t be going with marble in this bathroom, we could go with light counters and floors to give a similar look.

Charlie and Co. Design

 

I love all things Sarah Richardson. She always comes up with interesting and unexpected touches. This bathroom of hers has a nice unique floor pattern.

And this one of Sarah’s has a good combo of glam and rustic.

Sarah Richardson Design

I would love to go with a natural wood vanity like this one designed by Tiek Built Homes, if only we could find one that looked like this in our price range! The beaded mirror and sconces add a nice traditional touch.

Tiek Built Homes

So what bathroom trends have you been loving lately?

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Have you ever looked at modern art and thought…

…phsaw, I could totally paint that.

I know I do. Which is why I tried my hand at creating a little artwork for our living room.

DIY art using paint samples

I will start this off by saying I don’t really think all modern art is easy. It does take talent, and there are many great modern artists that have amazing skills. But, you know you’ve thought it when looking at some of it.

Awhile back I had printed off some some free prints as filler since I couldn’t figure out what to put in them. Now over a year later I still hadn’t updated them, so off to Michael’s I went for some art supplies.

I picked up a pack of canvases, some cheap brushes, and a pack of small acrylic paints to get me started. The last time I painted anything for the purpose of making art was in 7th grade, so I’m sure any real artists are having a good chuckle at my little attempt at art here.

After trying (and failing) at getting good colors mixed up, a little light bulb went off. I have a hoard of paint samples already mixed into beautiful shades of grays, blues, tans, and greens! Score.

Use Paint Samples for Easy DIY Art!

The background for all of these is Sherwin Williams Comfort Gray. I dabbed a little white here and there on two of the canvases, and I used straight horizontal strokes on the other two canvases.

I used a little red from my new pack of acrylic paints on this one.

Use leftover paint samples for art project

I used a little golden yellow on this one.

Use old paint samples to make art

This one is basically just Sherwin Williams Comfort Gray and white.

Sherwin Williams Comfort Gray Paint Sample Art

And on this one I used a little Sherwin Williams Liveable Green for the stripe (kind of hard to see with the reflections…the pitfalls of a bright room!)

Sherwin Williams Liveable Green Paint Sample Art

I probably won’t quit my day job to become an artist, but I may jazz these up a bit more one of these days to add more of…something. They are a little plain, but for now they add the colors I was going for. I’ve been looking around at art for inspiration (I would never copy, but just getting ideas here and there) to see what more I can do with these. I’m also thinking of getting some larger stand alone canvases to paint and put in other spots around the house.

Use paint samples to create DIY art!

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator

Easy No Sew Table Runner

I’ve been so pleased with our no sew roman shade from mini blinds that I bought some more fabric from Tonic Living and made a little runner.

easy no sew table runner

This was super easy.

Just figure out the length and width you want the runner.

easy no sew table runner

Cut your fabric 2 inches longer and wider than you want it.

tonic living fabric

I folded the hem over twice so it would have a cleaner line which is why I gave an extra two inches for the length and width. When it folds over the side of the table the thicker hem seems to make it lay nicer, especially on our round table which can do weird things to runners. I ironed the hem before gluing.

easy no sew table runner

Run a line of fabric glue (don’t use regular glue!) under the hem and press evenly along the edge. Use wet paper towels to wipe up any excess glue. You may need to run an extra line of glue once you fold it over You want the entire hem glued down and secure.

fabric glue for new sew project

new sew table runner using fabric glue

Done!

no sew runner tonic living fabric

Notice the trim around the peninsula? It’s almost done! I’ll be back to share all the details later.

It coordinates but isn’t “matchy” with our no sew roman shade that is on the window over the sink. I couldn’t get a picture of both together, but when you walk into the kitchen you can see both.

The fabric is from Tonic Living, but I don’t see it up on the website anymore. We got our roman shade fabric from there too. Love that store!

no sew table runner with fabric glue

Also, make sure to go to my paint color blog Involving Color this Monday for another paint color party!

Linking up to: Funky Junk Interiors, Savvy Southern Style, Remodelaholic, The DIY Show Off, My Uncommon Slice of Suburbia, Home Stories A2Z

 

Potted Herb Garden

This year we decided to make a little potted herb garden.

how to plant potted herb garden

But not totally DIY. We decided against doing it from seed since these little guys weren’t much more expensive than the packs of seeds.

how to plant potted herb garden

We used this moisture lock soil recommended by the garden center.

soil to use for potted herb garden

Dump some in and add the plants.

how to plant a potted herb garden

Easy peasy.

We have basil, oregano, and parsley. I’m looking forward to some yummy Italian dishes. Maybe a little tomato basil pizza and some herbed up pasta with marinara. Yum yum.

We have lots of critters that run around the yard that eat things, namely a couple of ground hogs that stop in for regular visits as well as deer passing through. We put them up on the table to keep them away from the ground hogs. I really don’t know how much they like herbs, but they went to town on my mums last fall and ate almost all of the blooms. Not cool, ground hog. Not cool. So we’re being preventative and putting these out of their reach.

how to plant potted herbs

Not much we can do about deer but hope they won’t be adventurous enough to come on the patio.

On the (ever growing) to do list is to build or buy some kind of shelving and put it up against the house. Until then they will live on the table. They do make a nice decoration, don’t you think?

Linking up to: Funky Junk Interiors, Savvy Southern Style, Remodelaholic, The DIY Show Off, My Uncommon Slice of Suburbia, Home Stories A2Z

Making the Peninsula Trim – Part One

We’re making custom trim around the peninsula of our Ikea cabinets, and the goal was to make a trim that coordinated with the Lidingo doors. You can see a little mock up here at the end which we are going to run all along the back too. That end piece was just a test piece, so the final product will look more seamless.

I first thought about doing board and batten, but the plain squared edges of board and batten didn’t seem to go with the Lidingo doors at all. I think it would have looked mismatched. Then we thought about making raised panel wainscoting that would be almost identical to the raised panel Lidingo doors, but this would have been a long, time consuming project, so instead we went with a flat panel look. The rails and stiles have a decorative routed edge that I think ties in better to the Lidingo doors than a plain squared board and batten would.

So far we’ve gone from this.

how to make wainscoting

To this.

how to make painted maple kitchen wainscoting

We originally planned on getting the wood from Home Depot or Lowe’s, but after sampling some poplar and pine it was too soft. The area around the peninsula gets a lot of traffic and I didn’t want the corners and edges to get all beat up. I could easily scratch the softer wood with my fingernail, so I thought it would be better to go with a stronger wood like maple.

The big box stores by us don’t carry maple boards (I’m not sure if any do, but the ones by us don’t seem to), so a couple weeks ago I went to Vienna Hardwood with my dad to pick out some maple.They had lots of maple.  Phone pics, excuse the quality.

maple boards for trim vienna hardwood

This is a neat store and they seem to carry just about every type of wood you can imagine from the basics to exotics.

where to buy exotic hardwood

My dad is handy with woodworking and offered to help with making the trim. It was fun for me because I haven’t ever done something like this before so I got to see how all of the tools worked.

If some of these tools like like antique versions of ones you see today, well that’s because they are. Well, maybe not antique, but they’ve been around awhile. The table saw and band saw were my grandfather’s and are very old. My dad remembered my grandfather having these tools when he was young and my first thought was they had, like, power tools back then? Ha. Apparently so.

First step was to cut the large boards down to length with the compound miter saw (could use a table saw too). We made them a little long at first.

how to make custom kitchen island trim

Then cut to width with the band saw (cut a little wide)

using bandsaw to make custom kitchen cabinet trim

Run along the jointer to make sure they are nice and straight.

using a jointer for custom kitchen island trim

 

using a jointer to make custom cabinet trim

using a jointer to make custom cabinet trim

Cut exactly to the right width using the table saw.

using table saw for custom cabinet trim

Split piece down the middle with the band saw.

using bandsaw for custom wainscoting in kitchen

Use the thickness planer to smooth out the pieces and make exactly the same thickness.

thickness planer for custom cabinet trim

We drew up a plan to figure out the measurements for the length of the rails and stiles.

planning out kitchen cabinet wainscoting

The stiles (vertical pieces) will be covered by baseboards at the bottom, so they didn’t need to be precisely the same height, just tall enough to be covered by the baseboard. We used the compound miter saw to cut the stiles. (I helped a bit!)

using compound miter saw to make wainscoting

We used the table saw to get the rails (horizontal pieces) all exactly the right length.

using table saw with miter gauge for wainscoting

Cope the ends using a router.

coping wainscoting using router

coped edges for wainscoting

Route the edges.

using router for wainscoting

Voila!

how to make painted maple kitchen wainscoting

Next up will be giving these a light sanding, attaching these to the peninsula panel, priming, and painting.

Make sure to link up your paint colors if you haven’t already over at my paint color party on Involving Color!

<div align="center"><a href="http://involvingcolor.com/blog/category/paint-color-parties/" title="InvolvingColor"><img src="http://involvingcolor.com/blog/wp-content/uploads/PaintColorParty200x2001.png" alt="InvolvingColor" style="border:none;" /></a></div>

Linking up to: Funky Junk Interiors, Savvy Southern Style, Remodelaholic, The DIY Show Off, My Uncommon Slice of Suburbia, Home Stories A2Z

Let's Connect!
InvolvingColorFacebook InvolvingColorTwitter InvolvingColorPinterest InvolvingColorInstagram InvolvingHomeFeed InvolvingHomeFeed

Enter your email address:

Delivered by FeedBurner


InvolvingColorBlog InvolvingHomeBlog
Involving Home is powered by Hostgator